目录
• TLV2342的PDF下载
• TLV2342的特点(Features)
• TLV2342的说明(Description)
• TLV2342的技术参数(Specifications)
• TLV2342的全国供应商
• 快速发布TLV2342的紧急采购！-->

The TLV234x operational amplifiers are in a family of devices that has been specifically designed for use in low-voltage single-supply applications. Unlike other products in this family designed primarily to meet aggressive power consumption specifications, the TLV234x was developed to offer ac performance approaching that of a BiFET operational amplifier while operating from a single-supply rail. At 3 V, the TLV234x has a typical slew rate of 2.1 V/ms and 790-kHz unity-gain bandwidth.

Each amplifier is fully functional down to a minimum supply voltage of 2 V and is fully characterized, tested, and specified at both 3-V and 5-V power supplies over a temperature range of –40℃ to 85℃. The common-mode input voltage range includes the negative rail and extends to within 1 V of the positive rail.

Supply voltage, VDD (see Note 1) .....................................................................8 V
Differential input voltage, VID (see Note 2) ...................................................VDD±
Input voltage range, VI (any input) ...................................................–0.3 V to V_DD
Input current, I_I........................................................................................... ±5 mA
Output current, I_O .....................................................................................±30 mA
Duration of short-circuit current at (or below) T_A = 25℃ (see Note 3)..... unlimited
Continuous total dissipation ......................................See Dissipation Rating Table
Operating free-air temperature range, T_A .........................................–40℃ to 85℃
Storage temperature range ............................................................–65℃ to 150℃
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds ...................260℃
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to network ground.
2. Differential voltages are at the noninverting input with respect to the inverting input.
3. The output may be shorted to either supply. Temperature and /or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded (see application selection).